As one of the core components of CNC lathes, the maintenance of CNC turret is essential to ensure the accuracy, stability and extend the service life of the machine tool. The following are several aspects that need to be paid attention to in the maintenance of CNC turret:
1. Regular cleaning and lubrication
During the operation of CNC turret, metal chips, dust and other impurities will be generated, which will adhere to the surface and sliding parts of the equipment, affecting the accuracy and stability of the equipment. Therefore, regular cleaning is necessary. You can use special brushes and air guns and other tools to clean the equipment to ensure that the surface and sliding parts of the equipment are clean and free of impurities. At the same time, lubrication should be performed after cleaning, and lubricating oil that meets the recommended requirements of the equipment manufacturer should be selected and lubricated as required to ensure the normal operation of the equipment.
2. Pay attention to the replacement of lubricating oil
Lubricating oil plays a role in lubrication and wear reduction in the operation of CNC turret. However, as the use time increases, the lubricating oil will deteriorate and contaminate, affecting its performance. Therefore, the lubricating oil needs to be replaced regularly. When replacing the lubricating oil, you should pay attention to selecting the appropriate type and brand, and follow the recommendations of the equipment manufacturer. Generally, the replacement cycle of lubricating oil should be determined according to the frequency of use of the equipment, the working environment and the performance of the lubricating oil.
3. Check the wear of the guide rails and sliders
The guide rails and sliders are key components of CNC turret, which directly affect the accuracy and stability of the equipment. Therefore, it is necessary to check the wear of the guide rails and sliders regularly. If the wear is found to be serious, it should be replaced or repaired in time. In addition, attention should be paid to keeping the guide rails and sliders clean and removing impurities accumulated on them in time.
4. Check the wear of the tool and the tool holder
The tool is an important tool for CNC turret processing, so it is necessary to check the wear of the tool regularly. If the tool is found to be seriously worn, it should be replaced in time. At the same time, attention should also be paid to checking the wear of the tool holder and repairing or replacing it as needed.
5. Calibrate the equipment regularly
After long-term use, CNC turret may deviate due to various reasons. In order to ensure the accuracy and stability of the equipment, the equipment needs to be calibrated regularly. You can use professional calibration equipment for calibration, or ask relevant technicians to operate it.
In summary, the maintenance of CNC turret includes regular cleaning and lubrication, paying attention to the replacement of lubricating oil, checking the guide rails and slides, checking the tools and tool holders, and regular calibration of the equipment. By doing these maintenance work, the service life of CNC turret can be effectively extended and the
