What safety precautions should be taken during CNC turret operation?
Publish Time: 2024-06-04
During the operation of CNC turret, safety is always the most important thing. The following are six safety precautions that need to be paid attention to during the operation of CNC turret:
Wear protective equipment:
Protective equipment must be worn before operation, including work clothes, safety helmets, protective glasses, earplugs, etc. These protective equipment can effectively protect the operator's body from splashing chips, coolant and other potentially dangerous substances.
Equipment inspection and maintenance:
Before operation, equipment inspection and maintenance must be carried out to ensure that the CNC turret is in good working condition. The inspection content includes but is not limited to whether the protective door can be opened and closed normally, whether the tool and chuck are damaged, etc.
Follow the operating procedures:
The operating procedures of CNC turret must be strictly followed, and unauthorized operations and parameter settings of debugging equipment are prohibited. Specific operations can only be performed under the permission and guidance of professionals.
Pay attention to the working status of the equipment:
When the equipment is in working condition, the operator must always pay attention to the working status of the equipment. If there are abnormal sounds, vibrations or other problems, the machine should be stopped immediately for inspection and troubleshooting.
Do not wear loose items:
During the operation, it is strictly forbidden to wear loose clothing, necklaces or long hair, etc., to prevent being entangled by tools or mechanical parts and causing safety accidents.
Precautions for tool change operation:
When changing tools, special attention should be paid to safety. First, make sure that the machine tool has stopped running and disconnected the power supply, and wait for the spindle to stop rotating completely before changing the tool. Secondly, check whether the tool and chuck are damaged in advance, and replace them in time if damaged. During the tool change process, ensure that the tool clamping force is moderate, neither too tight nor too loose, to prevent the tool from loosening or deviating. At the same time, the operator should wear protective equipment such as protective gloves and goggles to prevent being injured by fragments such as tools and chucks.
In summary, when operating CNC turret, you must strictly follow the safety operating procedures to ensure the safety of yourself and others.
